Solar for Commercial Laundries in New Jersey
LandAir plans solar for industrial laundries and linen suppliers, built around tunnel washers, dryers, flatwork ironers and the steam and hot water plant behind them.
LandAir supports commercial solar planning, engineering and project coordination for New Jersey properties. The review starts with the building, its electric accounts and the owner's goals.
Review your actual bills, property constraints and design assumptions.
Review the property
Review electric use
Define the project
Solar for commercial laundry plants and linen suppliers
A linen plant turns hospital, hotel and restaurant textiles every working shift. Soiled goods enter a tunnel washer or washer extractors, move through presses and dryers, then pass over flatwork ironers and folders before loading on trucks. Dryers and boilers burn gas in many plants, but motors, blowers, pumps, conveyors, air compressors and lighting run on electricity, and many plants add heat pumps and electric water heating. Wet processing creates humid air that needs exhaust and make-up air fans. The building is a wide, flat roofed warehouse style structure with few shaded surfaces, and plants run early, so output peaks within the longest operating hours. Use your actual utility tariff and electric usage to estimate the value of solar production.
Identify which process equipment uses electricity and which uses gas or other fuels. Solar PV offsets electricity; it does not directly replace fuel-fired process heat. Confirm the actual equipment and energy sources before projecting savings.
- Site-specific energy cost modeling
- Review of ownership and operating costs
- Project eligibility review
- Property and tenant planning
Planning panels above wet, hot and humid plant operations
Our engineers start on the roof, where exhaust stacks, make-up air units and boiler flues put heat and moisture into the air. We map every penetration, check deck and framing under New Jersey snow and wind loads, and choose corrosion resistant hardware for humid exhaust zones. Panel rows keep a distance from discharge points and leave maintenance paths for plant crews. We read demand from washer, dryer fan, ironer and compressor loads, then size the array to your longest shifts. If you plan to convert gas equipment to electric heat pumps or water heaters, we build capacity for that load into the design. We handle permits and township reviews, and arrange bank financing so the plant owns its system.
Related: Commercial Services and Recreation and Commercial solar cost guide. See every business type we cover on our industries page.
- Electric bill review and usage pattern check
- Roof and site constraint review including access and safety
- Preliminary layout and sizing assumptions you can validate
- Early notes on permitting and interconnection requirements
- Clear next steps for design, pricing, and timelines
Review project economics and eligibility
Compare installed cost, financing, expected production, utility charges and ongoing operating obligations for the specific property. A production estimate is separate from a savings estimate; demand and fixed charges may remain.
Federal tax treatment and New Jersey production incentives have separate eligibility, ownership, registration and timing rules. Confirm the applicable requirements with the program administrator and your tax advisor before including benefits in a budget. See the New Jersey commercial solar incentives guide and cost and ROI guide.
Confirm each assumption before including it in a project budget.
Project cost
Review the complete scope, exclusions and financing terms.
Tax treatment
Eligibility and the benefit your organization can use require tax-advisor review.
Program eligibility
Confirm current program rules, registration and project requirements.
Production and usage
Model expected output separately from savings using the actual utility tariff.
Plan the project sequence
Share bill and site details
Develop the design and approvals plan
Agree construction and handover
What's Included for Commercial Laundries and Linen Supply
Tunnel washers and washer extractors
Large washing equipment runs pumps, drives and hydraulics through the whole shift. We read its electric demand from your meter data and cover the daytime portion of it with panel output from the plant roof.
Dryers, ironers and folders
Gas fired dryers still run blowers, drums and controls on electric power, and ironers and folders add motor loads. These machines give a steady demand that matches solar production during the working shift.
Boilers, heat recovery and hot water
Steam and hot water plants include feed pumps, burners and controls. If you move toward heat pumps or electric water heating, we size the array and service capacity for that added load.
Exhaust, make-up air and humidity
Wet processing needs strong ventilation. Exhaust fans and make-up air units add continuous load to the account, and their roof stacks shape exactly where our engineers lay panel rows on the deck.
Compressors, conveyors and truck docks
Air compressors, sling conveyors and dock doors keep goods moving between customers and the plant. They add to the all-shift base load that a rooftop array is built to offset.
Ownership, credit and SuSI income
Potential New Jersey production incentives depend on the current program, project category, registration and eligibility. Confirm the applicable terms before modeling revenue. Federal tax benefits depend on the system owner, project timing and applicable requirements. Have your tax advisor confirm eligibility and the benefit your organization can use.
Property considerations
Roof and structure
Operating patterns
Maintenance
Meters and ownership
Approvals and access
Critical operations
New Jersey project support
LandAir supports commercial solar project planning across New Jersey from Cherry Hill.
Discuss your commercial solar project
Share the property address, electric usage and the decision you need to make. Review feasible options and the next steps with LandAir.
Frequently asked questions
Does a gas heavy laundry still benefit from solar?
Yes. Dryers, boilers and ironers may burn gas, but their blowers, drives and controls, plus washers, pumps, conveyors, compressors and lighting, use electricity. We read your bill to see how much sits in daylight hours.
How do you place panels near humid exhaust?
Our engineers keep panels clear of discharge points, choose corrosion resistant hardware in humid zones, and set maintenance walkways across the roof. We review stack locations with your plant manager and maintenance crew before final drawings.
Can the plant add electric heat later?
Yes. If you move from gas to heat pumps or electric water heating, that adds load. We leave service capacity and space for it in the electrical design, so the array and the upgrade work together.
Do hospital linen contracts affect the project?
Construction is scheduled around shipping and receiving so deliveries stay on route. We agree on crane picks and any brief shutdown windows with your plant manager so every customer commitment stays on schedule and your drivers keep their usual dock routines.
